PolyScience VSCR-200AC1B Manuel d'utilisateur télécharger pdf (Page 19)

www.cuisinetechnology.com 18

Canisters not vacuuming properly.

• Accessory hose not properly attached. Make sure vacuum

hose is completely inserted into the Lid of the canister and

attached securely to the vacuum hose port on the Vacuum

Sealer.

• Port on canister in incorrect position. In Marinate mode, port

should be in the “Open” position; in Canister mode, port

should be in the “Vacuum” position.

• Insufficient head space in canister. Allow at least 1 inch (2.5

cm) of space between the surface of the items in the canister

and the Lid.

• Damaged canister Lid or body. Check canister, Lid, and seal

for damage.

“E” displayed on digital readout.

• Vacuum Compartment Lid open. Close Lid.

• Unit has overheated. Press On | Off and allow unit to cool for

20 minutes. Once unit has cooled, press On | Off to resume

operation.

WARNING: When the unit is used for an extended

period of time without allowing sufficient time

between sealing, it may overheat and shut down.

Allow at least 20 seconds between each seal.

TECHNICAL SPECIFICATIONS

Electrical Requirements:

Overall Dimensions:

Weight:

Maximum Bag/Roll Width:

Model VSCR-200AC1B - 120VAC, 0.9A, 60Hz

Model VSCR-200AC2E - 240VAC, 0.45A, 50Hz

12.75 (L) x 16.13 (W) x 4.13 (H) inches

(32.4 x 41 x 10.5 cm)

8.2 lbs (3.7 kg)

12.2 inches (31 cm)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

PolyScience VSCR-200AC1B Manuel d'utilisateur Page 19